Submersible Rainwater Harvesting Pumps
Ecovort (red & black):
This handy automatic pump is a multi-purpose submersible pump, designed for basic drainage and emptying, circulating water in ponds, creating waterfalls and water features, and pumping water between containers. This pump is manufactured with non-corrosive, rust proof materials and a ceramic shaft sleeve to ensure a long lifespan and its energy efficient motor is build with overload protection and stainless steel shaft. Oil free operation. Pump will operate if partially submerged. Comes with a 16' power cord and an elbow with an "o" ring for a superior seal. Available in either an automatic or manual start/stop version.
Divertron (black & stainless steel):
With automatic on/off as a standard feature, this pump is an easy to use solution for your rainwater harvesting system. Built in sensor measure pressure and flow rate. Dry-run protection is included in this high performance, four-stage pump design. The Divertron X model is equipped with a 1" FPT stainless steel intake fitting for use with floating suction assemblies, while the standard Divertron model has a screened intake around the bottom of the pump. No wiring or pump start relay required for irrigation systems. Connect to a 115V AC outlet with the supplied 48' power cord. Rated for a max 157' max Total Dynamic Head (TDH).
Ecovort (red & black): This handy automatic pump is a multi-purpose submersible pump, designed for basic drainage and emptying, circulating water in ponds, creating waterfalls and water features, and pumping...
Ecovort (red & black):
This handy automatic pump is a multi-purpose submersible pump, designed for basic drainage and emptying, circulating water in ponds, creating waterfalls and water features, and pumping water between containers. This pump is manufactured with non-corrosive, rust proof materials and a ceramic shaft sleeve to ensure a long lifespan and its energy efficient motor is build with overload protection and stainless steel shaft. Oil free operation. Pump will operate if partially submerged. Comes with a 16' power cord and an elbow with an "o" ring for a superior seal. Available in either an automatic or manual start/stop version.
Divertron (black & stainless steel):
With automatic on/off as a standard feature, this pump is an easy to use solution for your rainwater harvesting system. Built in sensor measure pressure and flow rate. Dry-run protection is included in this high performance, four-stage pump design. The Divertron X model is equipped with a 1" FPT stainless steel intake fitting for use with floating suction assemblies, while the standard Divertron model has a screened intake around the bottom of the pump. No wiring or pump start relay required for irrigation systems. Connect to a 115V AC outlet with the supplied 48' power cord. Rated for a max 157' max Total Dynamic Head (TDH).
Height: " | Width: " | Length: "
Part # / Model | HP | Watts | Volts | Frequency | Max Flow | Max Head | Max PSI | Suction | Discharge | Description |
---|---|---|---|---|---|---|---|---|---|---|
US520001
|
1/2 HP | 650 | 115 | 60 | 3600 gph | 28 ft | 12 | N/A | 1" 1/4 | ECOVORT 520A |
60113144
|
3/4 HP | 1000 | 115 | 60 | 27 gph | 118 ft | 52 | N/A | 1" | DIVERTRON 1000 |