Aluminum MC x Hose Barb Type E Adapters

BARR's camlocks are ideal where frequent and fast connections are required on fluid transfer lines (note that no camlock materials or styles are designed for use with compressed air, gases or steam). Standard Camlock Gaskets are made of Buna-N Nitrile to resist water and low aromatic petroleum products. Remember to always confirm if gasket material is compatible with fluid.

Manufactured from a high quality aluminum alloy, these camlocks feature 304 stainless steel pins, impact/wear resistant forged brass arms, plated steel finger rings, and a sand-cast body finish. They are heat treated to provide greater durability and are made to strict tolerances to ensure a leak proof seal (i.e. they meet MIL SPEC 27487, A-A-59326 American Standard and DIN2828 German Standard in sizes 3/4" to 6" and will interchange with others that meet these specifications).

Rated working pressure at 20°C (70°F)for 1/2" to 2" sizes=250 PSI. For 2-1/2" sizes=150PSI, for 3"=125 PSI, 4"=100 PSI, 5"-6"=75 PSI, and 8" = 50 PSI. Temperature Range: As a guide only, aluminum may be suitable for -150°F to +250°F.