350 USG Brine Maker & Sprayer Unit
The COMBO350 Low-Profile Brine Maker & Applicator Unit is a new innovative, proprietary design from BARR that combines everything you need to take full control of brine mixing and applying for anti-icing and de-icing applications. Completely made from corrosion and rust resistant materials, this unit is designed to have a long service life and has a capacity of 350 USG.
An economical, easy-to-use and highly efficient anti-icing unit, ideal for smaller scale service areas or service areas spread across a larger service region, ie: parking lots and large building entrance ways and driveways, etc.
This equipment can also be used as general water handing unit to haul and transfer water for fire-fighting, wash-down, plant watering, dust suppression and other construction site water service applications.
Compatibility: When full, this unit can weigh over 3,500 Lbs. Minimum vehicle to operate this unit safely is a 1-ton long box truck or bigger
The COMBO350 Low-Profile Brine Maker & Applicator Unit is a new innovative, proprietary design from BARR that combines everything you need to take full control of brine mixing and applying...
The COMBO350 Low-Profile Brine Maker & Applicator Unit is a new innovative, proprietary design from BARR that combines everything you need to take full control of brine mixing and applying for anti-icing and de-icing applications. Completely made from corrosion and rust resistant materials, this unit is designed to have a long service life and has a capacity of 350 USG.
An economical, easy-to-use and highly efficient anti-icing unit, ideal for smaller scale service areas or service areas spread across a larger service region, ie: parking lots and large building entrance ways and driveways, etc.
This equipment can also be used as general water handing unit to haul and transfer water for fire-fighting, wash-down, plant watering, dust suppression and other construction site water service applications.
Compatibility: When full, this unit can weigh over 3,500 Lbs. Minimum vehicle to operate this unit safely is a 1-ton long box truck or bigger
Couldn't load pickup availability
Reliable Contractor Brine Makers for Easy De-Icing
| Description | Part # |
|---|---|
| 350 USG Brine Maker & Sprayer Unit | BMBA300 |
Specifications
- Capacity: 350 gallons
- Material: Corrosion-resistant construction
- Application: Anti-icing, de-icing, dust control, firefighting, plant watering
- Required Vehicle: Minimum 1-ton long box truck
- Features: Integrated brine maker and sprayer, user-friendly operation, versatile application
Features
- Manufactured with all durable, corrosion-resistant materials.
- Produces 23% salt brine solution in approx. 15 minutes, once filled with the appropriate amounts of road salt and water, all controls accessible from the ground.
- One tank of brine solution can cover up to approx. 15 lane kms at a commonly used application rate of 70L per lane km (Approx. 12 Acres) (30USG/ Lane Mile).
- Powered by a quality commercial 6 HP GX200 Honda gas engine with a 2”, high flow, 45 PSI brine pump.
- Auxiliary 2” pump suction and discharge ports to use on-boar pump for liquid transfer.
- Optional high quality 50’ Hose Reel and Spray Nozzle Assembly.
- 2” strainer installed on the pump inlet to help keep any debris out of pump and spray bar.
- Electric on/off valve to open and close the spray bar.
- Spray bar is fitted with quick change, adjustable spray tips capable of covering up to a 14-foot-wide laneway. Tips have 360-degree adjustability at up to a 25 degree angle t place brine right where you want it.
- Spray tip plugs are also included to further adjust your spraying coverage and volume applied.
- Sampling tap located on side facing the operator for testing brine concentration before spraying. (Hydrometers sold separately)
- Low centre of gravity and tank baffles provides greater stability, driver safety and lessens wear and tear.
- Ease of operation makes the BMBA350-LP suitable for a variety of operators with some basic instruction. barrplastics.com
- Spray bar frame fits easily into a standard truck hitch receiver.
- This unit has a low net weight so does not take up much of the trucks carrying capacity. It can be used, fully loaded on a heavy 1 tonne long-box pickup truck when the unit is positioned at the front of the box or deck.